Crimping Tool 336-i für Aircell 7, H-155, CLF240

Crimping Tool HT with Ratchet, Emergency Release and Crimp Insert Type 336-i 

The Crimp Insert Type 336-C has the following sizes: 

• 0.067" = 1,70 mm 
• 0.093" = 2,36 mm 
• 0.211" = 5,36 mm 
• 0.254" = 6,45 mm 
• 0.315" = 8,00 mm 

Crimpsize 1.70 mm is required for the most inner conductor-contacts of coaxial cables as follows: 

• RG 58 
• RG 59 
• RG 62 
• RG 71 
• RG 142 
• RG 223 
• RG 400 
• Aircell 5 
• H 2005 
• CLF195 
• CLF200 
• HDF195 
• HDF200 
• LMR195 
• LMR200 

Crimp size 2.36 mm is required for some inner conductor contacts that only have an outer diameter of 2.80 mm in the crimp area and can occur with the following cable types: :  

• Aircell 7 
• H2007 
• Highflexx 7 
• CLF 300 
• HDF 300 
• LMR 300 

Crimpsize 5.36 mm is required for crimp ferrules of crimp connectors following coaxial cables: 

• RG 58 
• RG 59 
• RG 62 
• RG 71 
• RG 142 
• RG 223 
• RG 400 
• Aircell 5 
• H 2005 
• CLF195 
• CLF200 
• HDF195 
• HDF200 
• LMR195 
• LMR200 

Crimpsize 6.45 mm is required for crimp ferrules of crimp connectors following coaxial cables: 

• H 155 
• CLF240

Crimpsize 8.00 mm is required for crimp ferrules of crimp connectors following coaxial cables: 

• Aircell 7 
• H2007 
• Highflexx 7 
• CLF 300 
• HDF 300 
• LMR 300 

Note: Depending on the connector type and coaxial cable, the crimping dies on this crimping tool can be quickly and easily exchanged for other crimping dies from the 336 series using 2 screws. An overview you will find here